KillFlame
Timber
Deep-penetrating fire retardant for structural timber. BAL29 compliance for builders, tradies, and homeowners building in fire-prone zones.
Rating
BAL29
Coverage
7m²/L
PFAS
0%
Penetration
3mm
Overview
About KillFlame Timber
KillFlame Timber is a professional-grade, penetrating fire retardant designed for raw timber in construction. It achieves BAL29 compliance as required by AS3959 for buildings in bushfire attack level zones.
Unlike surface-only intumescent paints, KillFlame Timber penetrates up to 3mm into timber fibres. This creates a permanent, integrated fire barrier that won't chip, peel, or wear away.
The clear formula accepts all standard timber finishes — stains, oils, paints, and sealers can be applied over the treated surface. Ideal for structural beams, wall framing, cladding, and joists.
Specifications
Technical Data
| Coverage | Up to 7m² per litre (depending on timber porosity) |
| Substrates | Raw timber, structural beams, cladding, framing, joists |
| Certifications | BAL29 Rated, AS3959 Compliant |
| Available Formats | Ready-to-Use (RTU) & Concentrate |
| Application Method | Spray, brush, dip, or vacuum impregnation |
| Penetration Depth | Up to 3mm into timber fibres |
| Finish | Clear — accepts stains and coatings |
| PFAS Content | Zero — 100% fluorine-free |
Application
Application Protocol
Timber must be raw, clean, and dry (moisture content below 20%).
Remove any existing finishes, paints, or sealers before treatment.
Shake well. For concentrate, dilute according to label instructions.
Apply liberally via spray, brush, or dip until timber is saturated.
Allow to penetrate and dry completely (12-24 hours recommended).
Apply topcoats (stain, paint, oil) only after full cure.
Safe for construction.
Safe for the environment.
KillFlame Timber contains zero PFAS, PFOS, or PFOA. It's safe for use on all timber — including in sensitive environments near waterways, rainwater tanks, and native bushland. Build responsibly without compromising on protection.
PFAS Content
0%
Soil Safe
Yes
Clear Finish
Yes
Accepts Topcoats
Yes
Get Started
Building in a BAL zone?
Get a quote for KillFlame Timber. Available in RTU and concentrate formats for builders, tradies, and commercial applicators.
Request Quote